Highways
Cycle Lanes
Pedestrian Zones
Bridges & Tunnels
Parking
School Zones
Industrial
RecreationSurface thickness3–5 mm
Engineered materials · Consistent quality · Global supply
Advanced colored surfacing materials
Professional resin-bound surfacing systems developed for dependable skid resistance, durable color performance and efficient installation across demanding road and infrastructure projects.
Water-Based Colored Micro Surfacing
Water‑Based Colored Micro Surfacing is an eco‑friendly thin‑layer pavement resurfacing material. Made of water‑borne polymer and inorganic aggregates, it can be directly overlaid on existing asphalt or concrete, refreshing road color and improving anti‑slip performance for road renovation.
Reliable adhesion, durable color and consistent anti-skid performance for professional road and infrastructure projects.
Skid resistanceBPN ≥ 65
Material usage per m²3.5–5.0 kg/m²
Cure time at 20°C1–2 hours
Service life10+ years
Water-based eco materialLow VOC · Eco-friendly
Product overview
A complete colored anti-skid surfacing system.
- Factory-direct supply with consistent batch quality
- Custom color matching for traffic and landscape design
- Technical support from specification through installation
Performance advantages
Built for safer roads and longer service life.
Every layer is designed to improve safety, visibility and whole-life pavement value.
Typical skid resistance
Recommended applications
Clear guidance wherever road users need it most.
Suitable for new construction and rehabilitation projects where color distinction, surface grip and durable protection are required.
Installation process
Four controlled steps to a reliable finish.
Final application method is adjusted to substrate condition, climate and project traffic requirements.
Inspect & prepare
Assess the substrate, repair defects and remove dust, oil, moisture and weak material.
Prime the surface
Apply the specified primer to establish uniform adhesion to asphalt, concrete or metal.
Apply the system
Mix and spread the binder at the designed rate, then add aggregate or finish coat.
Cure & inspect
Remove excess material, verify coverage and friction, then reopen after full cure.
Technical data
Typical system specifications
Values shown are typical guide values. Project-specific performance depends on substrate, environment and application conditions.